Pictures of my 71 RS/Z28

[fast12]

Here are pictures of my 71 RS/Z28. This Car is 98% original. It has all matching numbers, and only 49000 miles. It has been sitting in a carport since 1981. I washed it for the 1st time two weeks ago. I also have all the original paper work, including the protoplate. .http://i87.photobucket.com/albums/k137/annah4589/FrontEnd.jpg
http://i87.photobucket.com/albums/k137/annah4589/DriversSideView.jpg
http://i87.photobucket.com/albums/k137/annah4589/CleanEngine.jpg
http://i87.photobucket.com/albums/k137/annah4589/CleanDash.jpg

[fast12]

The distriubutor,air cleaner,plug wires, upper radiator hose, water pump and tires are the only things that did not come from the factory on this car. I will start to restore this car this fall.

[D21458P]

That's nice Rod.

[outlaw77LT]

That's a one in a million find!!! Congrats man, makes me proud and it isn't even mine!!!:D :D :D :D

[torval]

Nice car Rod!

[musclecarmatt]

very very nice!!!!...only 49,000 thats not even broken in:cool:

[fast12]

When we picked the car up the car did not even bounce on the back of the rollback comming home. The shocks are still good.:cool:

[Camaro6662]

Rod you could levae that camaro at my house :cool:

[fast12]

Greg that would save me $90 a month storage.

[outlaw77LT]

Just noticed the 150mph speedo and the 6500rpm redline. It just keeps getting better. Even the metal dual line and holley carb. Did that come with a dual snorkel air cleaner? The bias-ply tires are a nice touch also!!!:D :cool:

[Camaro6662]

Rod I have one these dual snorkel air :D

[fast12]

Yes it came with the dual snorkle breather. That is the factory Holley carb too.

[outlaw77LT]

I've been rebuilding carbs for folks since I was 15. I know tons of stuff about Holleys. When it comes time for you to get yours done let me know. I'd make sure it would run better than it did new. I go as far as idle circuit / throttle blade position, air bleed flow, pump cam speed adj.

[fast12]

Thanks Kenny but,since this is the original carb it will go back to Holley to be rebuilt and,replated. I would have my friend at Reed cams flow it if it was not the real deal. I have always ran a flowed carb. There are all kinds of tricks you can do to a Holley. A little bit goes a long way.;)

[Zachs Bank]

rod this jeff i sure could use a camaro so i'm not shamed next year.car looks sharp. greg check your post and tell me how you spell leave! spell check not working? jeff!!!!!!!!!!!

[outlaw77LT]

Thanks Kenny but,since this is the original carb it will go back to Holley to be rebuilt and,replated. I would have my friend at Reed cams flow it if it was not the real deal. I have always ran a flowed carb. There are all kinds of tricks you can do to a Holley. A little bit goes a long way.;)

Could you get my 650dp flowed this winter? Does Reed have any solid grinds around 250-254@.050 520-530 lift? I run a Comp 250-252@0.050 519-525 lift now with 10 degree locks and comp part# 986 dbl spring, 1.440 od. I wouldn't mind trying one of their sticks

[outlaw77LT]

rod this jeff i sure could use a camaro so i'm not shamed next year.car looks sharp. greg check your post and tell me how you spell leave! spell check not working? jeff!!!!!!!!!!!

Hook the man up with a good 2nd gen Rod:D :cool:

[D21458P]

Hook the man up with a good 2nd gen Rod:D :cool:

Zach broke the bank:D

[fast12]

I found a nice 70 RS/Z28 for sale in Tyrone,ga. He is suppose to come to HOOTERS next Saturday for the show.:cool:

[fast12]

Outlaw,Reed can custom grind anything you need. Just tell them about your car and your engine also what you want to do with it. Dennis will be at HOOTERS next Saturday.:cool:

[outlaw77LT]

It'll be this winter before i need one, but I'll give em a try.